Stump Grinding in Selkirk, MB.

Clean, efficient stump grinding for residential and commercial properties across Selkirk and surrounding communities.

When a tree is cut down, you’re left with a stump that can be a real nuisance. It just sits there in your yard, getting in the way of your lawn mower and making your yard look incomplete. And to make matters worse, as it starts to rot, it can attract all sorts of unwanted pests like carpenter ants and beetles. But there’s a way to get rid of it quickly and cleanly: grinding it out. This is the best way to reclaim that space and get your yard looking neat and tidy again.

If you are not sure whether the tree needs to come down or just needs pruning, see our tree trimming page.

At Baxter Landscape and Tree Services, we offer stump grinding services to homeowners in Selkirk, MB, and the surrounding areas. Our team comes equipped with the right tools to get the job done efficiently. We grind the stump down below grade, so it’s no longer visible, and then clean up the area, leaving it ready for new grass seed or sod to be laid. Whether you’ve got a small stump or a large one, we’re happy to take on the task. No job is too big or too small for us.

How Stump Grinding Works

Most homeowners have never seen a stump grinder up close. Here is what to expect from start to finish.
We always start by checking for any underground utilities, it’s a crucial step that some companies often overlook, but it’s really important. To do this, we use a service called Manitoba One Call, they help us locate any buried lines in the area, so we don’t run into any surprises once we start digging. This way, we can avoid any potential problems and make sure everything goes smoothly. It’s a simple step, but it can make a big difference, and that’s why we always make sure to do it before we begin any work.

So, you want to get rid of that old tree stump. First, we need to make sure the area around it is clear of any debris. Once that’s done, we’ll bring in the grinder and position it right over the stump. Then, we’ll start moving the cutting wheel back and forth, slowly but surely taking the stump down to about six to twelve inches below the ground. As we do this, you’ll start to see a pile of coarse wood chips and sawdust building up where the stump used to be. After we’re all done, we’ll rake everything out so it’s nice and level, and then we’ll fill the hole back in with those wood chips. And, if you don’t want to keep the chips, no problem, we can haul them away for you, leaving the area looking tidy and neat.

The root system will stay underground and decompose naturally over time, which is usually not a problem for most people. You can pretty much forget about it and move on. Your yard will look neat and tidy again, the stump will be gone, and you can start fresh with new seeds or sod right away.

In Manitoba, it’s not just about having the right papers, it’s about being a real expert when it comes to trees. The government has rules that say if you’re going to check if a tree is healthy, figure out what’s wrong with it, or decide if it’s a risk, you need to have a special certification from the International Society of Arboriculture, or something similar. So, when you hire someone with this certification, you know they’re doing things by the book and following the rules set by the province. It’s not just some guy showing up with a truck and a chainsaw, it’s a professional who really knows what they’re doing.

The short version: a tree crew cuts and hauls. A certified arborist tells you what the tree actually needs and why.

Stump Grinding vs Full Stump Removal

Stump grinding takes the visible stump down below ground level using a cutting wheel. The roots stay in place and decompose on their own. It is faster, less invasive, and leaves your yard in much better shape than a full excavation.

Full stump removal pulls the entire root ball out of the ground using heavy equipment. It leaves a large hole that needs to be backfilled and is typically only necessary in situations where roots are actively causing foundation or drainage problems, or where construction is planned directly on that spot.

For the vast majority of residential jobs in Selkirk, grinding is the right call.

What We Grind

Single Stumps

One stump from a tree removal, a storm, or an old yard tree that has been sitting there for years. We handle stumps of all sizes, from small ornamentals to large elm and ash trunks.

Multiple Stumps

Got several stumps to deal with at once? We can knock them all out in a single visit. Multiple stumps on the same property are priced accordingly, and combining them into one job saves you time and money compared to booking separate visits.

Surface Roots

In Manitoba, elm and ash trees are known for spreading wide, shallow root systems. If you have surface roots coming up through the lawn or creating tripping hazards, we can grind those down as well. Just let us know when you book and we will factor it into the quote.

After the Stump Is Ground

Once we finish, you will have a shallow depression filled with wood chips and sawdust roughly level with the surrounding lawn. Here is what you can do with it:

Leave the chips and seed over them. Rake the chips level, add a thin layer of topsoil if needed, and seed or sod. As the chips break down over the next season or two, the area may settle slightly. Topping it up with a bit of soil takes care of that.

Use the chips as mulch. Spread them around your garden beds or shrubs. Good organic material and free of charge.

Have us haul them away. If you do not want chips on the property at all, we can remove them. Just mention it when you book.

On planting a new tree in the same spot: it is possible, but we generally recommend offsetting the new tree a few feet from the old stump location, or waiting a season for the chip-filled soil to settle before planting directly there.

Manitoba Considerations

Stump grinding in Selkirk comes with a few local factors worth knowing about.

Elm and ash root systems are extensive and shallow in Manitoba’s clay and loam soils. These species also sprout aggressively from stumps and roots if they are not ground down properly. We grind deep enough to cut off the energy source and reduce regrowth.

Spring conditions in the Red River Valley mean soft, wet clay after snowmelt. We are careful about equipment positioning on soft ground to avoid rutting your lawn. If conditions are not right, we will tell you.

Frozen ground in late fall can limit grinding depth. We factor this in on late-season jobs and will let you know what to expect before we start.

Why Selkirk Homeowners Choose Baxter

We Check for Underground Utilities First

Every job starts with a Manitoba One Call locate. We do not run a cutting wheel through your yard without knowing what is underground.

Fully Insured and WSIB Covered

Full liability insurance and workers’ compensation on every job. If something gets damaged or someone gets hurt, you are not left holding the bill.

200+ 5-star Google reviews

One of the highest rated tree and landscaping companies in Selkirk and the surrounding area. Our reputation matters more to us than any single job.

Clean Work, Every Time

We rake up after ourselves, backfill the hole, and leave your yard looking better than we found it. No chip piles left behind, no ruts through the lawn.

Right Equipment for the Job

We use compact grinders sized for residential properties that can access backyard stumps through standard gates without tearing up your lawn getting there.

Free On-Site Consultation

We come out, look at the stump, and give you a firm price before any work begins. No guessing, no surprises on the invoice.

Frequently Asked Questions

Helpful stump grinding information to make your decision easier.

How deep do you grind the stump?

Standard depth is six to twelve inches below grade. That is deep enough to allow grass or sod to grow over the area and eliminates most of the stump mass that would otherwise rot slowly above the root system. If you need it deeper for a specific project, let us know and we will work with you on that.

Will you grind the roots too or just the stump?

The main stump gets ground down below grade. The lateral root system stays in the ground and decomposes naturally, which is fine for the vast majority of properties. If you have visible surface roots that are a tripping hazard or are causing mowing problems, we can grind those down as well. Just mention it when you book so we can factor it into the quote.

Do you check for underground utilities before you start?

Yes, every time. We contact Manitoba One Call before any grinding job to locate buried lines in the work area. We do not start grinding until we know what is underground.

What do you do with the wood chips?

We rake the chips back into the hole and leave the area level and ready to seed or sod. If you want the chips spread elsewhere on your property as mulch, we can do that. If you want them hauled away entirely, we can arrange that too. Just let us know when you book.

Do you service areas outside of Selkirk?

es. We serve Selkirk and the surrounding area including East Selkirk, Lockport, Stonewall, the RM of St. Andrews, and parts of Winnipeg. Not sure if you are in our service area, give us a call and we will let you know.

How long does stump grinding take?

A single average-sized residential stump typically takes 30 to 60 minutes once we are set up. Larger stumps, multiple stumps, or surface root grinding will take longer. We can give you a time estimate along with your quote.

Get a Free Stump Grinding Quote in Selkirk, MB

If you have a stump you want gone, give us a call or fill out the form below. We will come out, take a look, and give you a firm price before any work is scheduled.